Product ID:MS-2000 BASE COMPONENT
MSDS Date:07/28/1998
FSC:8010
NIIN:00-519-1852
Status Code:A
Kit Part:Y
MSDS Number: CLMWT

AMERICAN SAFETY TECHNOLOGIES INC

565 EAGLE ROCK AVE
ROSELAND, NJ 07068
US

Emergency Phone: 1-800-424-9300

Info Phone: 973-403-2600

Preparer: ERNEST CARTER

Cage: 88444

AMERICAN SAFETY TECHNOLOGIES INC

ROSELAND, NJ 07068 US

Telephone: 973-403-2600

Cage: 88444

POLYAMIDE/EPOXY ADDUCT

CAS: 68424-41-9

AMIDOAMINE RESIN

CAS: 68443-08-3

1-METHOXY-2-PROPANOL

CAS: 107-98-2

RTECS: UB7700000

ACGIH TLV: 369 MG/M3;100 PPM

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:EYES: IRRITANT AGGREGATE MAY CAUSE
INJURY. SKIN: MAY CAUSE MODERATE IRRITATION AND SENSITIZATION.
INHALATION: VAPORS MAY CAUSE HEADACHES, NAUSEA, DIZZINESS AND
RESPIRATORY TRACT IRRITATION. INGESTION: NO SPECIFIC INFORMATION
AVAILABLE, CONTAINS MATERIALS THAT MAY BE SLIGHTLY TOXIC.
Effects of Overexposure:IRRITATION, SENSITIZATION AND DERMATITIS.
Medical Cond Aggravated by Exposure:ALLERGY, ECZEMA AND OTHER SKIN
CONDITIONS.

First Aid:EYES: FLUSH WITH LARGE QUANTITIES OF WATER FOR AT LEAST 15
MINUTES.GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED
CLOTHING. WASH CONTACT AREA WITH MILD SOAP AND WATER. INHALATION:
REMOVE TO FRESH AIR. IFBREATHING HAS STOPPED, ADMINISTER
ARTIFICIAL RESPIRATION AND SEEK MEDICAL ATTENTION. INGESTION: DO
NOT INDUCE VOMITING. (CONTAINS SOLVENT). GET MEDICAL ATTENTION.

Flash Point Method:PMCC
Flash Point:=37.8C, 100.F
Extinguishing Media:DRY CHEMICAL, CHEMICAL FOAM, CARBON DIOXIDE OR
WATER.
Fire Fighting Procedures:REMOVE ALL SOURCES OF IGNITION. WEAR COMPLETE
PERSONAL PROTECTION EQUIPMENT INCLUDING SELF-CONTAINED BREATHING
APPARATUS WHERE POTENTIAL FOR EXPOSURE TO VAPORS OR PRODUCTS OF
COMBUSTION EXISTS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY RUPTURE (DUE TO
BUILD UP OF PRESSURE) WHEN EXPOSED TO EXTREME HEAT.

Spill Release Procedures:ABSORB WITH INERT MATERIAL AND COLLECT FOR
DISPOSAL. FLUSH CONTAMINATED AREA WITH WATER; PREVENT WASHINGS FROM
ENTERING WATERWAYS.

Handling and Storage Precautions:GROUND AND BOND METAL CONTAINERS FOR
LIQUID TRANSFER TO AVOID STATIC SPARKS. A SAFETY SHOWER AND EYE
WASH FACILITY SHOULD BE AVAILABLE TO EMPLOYEES.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR WITH ORGANIC
VAPOR CARTRIDGE IF REQUIRED.
Ventilation:EXPLOSION PROOF MECHANICAL VENTILATION AND LOCAL EXHAUST
RECOMMENDED. MECHANICAL EXHAUST IS NOT RECOMMENDED TO BE THE ONLY
MEANS OF PROTECTING EMPLOYEES FROM EX
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL SPLASH PROOF GOGGLES.
Other Protective Equipment:IN OPERATIONS WHERE CONTACT MAY OCCUR
COVERALLS, APRON ANDIMPERVIOUS FOOT COVERING ARE RECOMMENDED.
Supplemental Safety and Health

Spec Gravity:0.96
Solubility in Water:PARTIALLY SOLUBLE
Appearance and Odor:AMBER LIQUID, SOLVENT ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE AND
OXIDES OF NITROGEN.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSE OF IN A LICENSED HAZARDOUS WASTE
FACILITY IN ACCORDANCE WITH APPLICABLE LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.